71
Protege™ Integrated System User Manual
11.0 ELEVATOR GROUPS
Elevator groups are used to define what elevators a user will be able
to access and/or control. A elevator group is assigned to an access
level (Refer to the Access Levels Section on Page 51) to restrict the
ability for a user to use certain elevators. For example service
elevators can only be used by service staff restricting them access to
the public elevators. The Protégé system supports up to 250 elevator
groups.
11.1 ALL ELEVATORS GROUP
The All Elevators group is a special elevator group that allows access
to all elevators within the system. The All Elevators group is assigned
to the master access level by default.
Changing the All Elevators group is not recommended
as it will restrict access to the elevators used by the
Master Access Level.
11.2 PROGRAM ELEVATOR GROUPS
Elevator groups should be programmed so that they are used for a
group of users, for example administration, legal department, butler
service, maintenance and management where the groups can clearly
be identified by the elevators that they need to access.
Programming Elevator Groups
Enter your [USER CODE] to logon to the keypad. Refer to the Logon
Keypad Section on Page 18.
