manualshive.com logo in svg

Protege LCD User Station, User Manual, Page: 33 / 94

Share
Download
Protege LCD User Station User Manual Download Page 33

 

 

 

31 

Protege™ Integrated System User Manual 

to and the current status. If you have 
access to more than one area you are 
able to scroll the areas using the         

and          keys.  
 
Press the         arm key. The area will 
enable the zones in the area. The display 
will show the progress. 
 

Once the enabling of the zones has been 
completed the area will now ensure that 
the zones in the area are ready to be 
armed. 

 

If an area has zones that are not ready to be armed 

and are not secured the display will show you the first 
zone that is open in the area. See force arming to 
force arm the zone or press the        key to bypass the 
displayed zone and continue with the arming process.  

  
When the zone is not ready to be armed 

the display will show the zone name on 
the first line and the zone status below. 
 
The display will then scroll showing the 
available options for the zone. Pressing 
the        arm key will start the zone test 

from the beginning. 
 
Pressing the        key will show the next 
open zone in the system.  
 
 

If the area that has been selected can be 
force armed the option to force arm the 

Warehouse 
Checking zone(s) 

Roller Door 
is OPEN 

Press [ARM] to 
re-test zone(s) 

Press [

Ð

] to  

view next zone 

Press [FORCE] to 
force arm area. 

Warehouse 
Enabling zone(s) 

Summary of Contents for LCD User Station































































































Reviews:

No comments