manualshive.com logo in svg

Protege LCD User Station, User Manual, Page: 51 / 94

Share
Download
Protege LCD User Station User Manual Download Page 51

 

 

 

49 

Protege™ Integrated System User Manual 

 

Once the user name is displayed clear 
the name entry by pressing the        key. 

Press the enter        key to move to the 
User Code entry screen. 
 
To clear the user code press the        
key. Press the enter        key to save the 
changes and move to the next 

programming screen. This will prevent 
pin number access using the user code. 
 
Clear the access level setting to none by 
pressing the        key. Press the enter 
        key to save the changes and move 

to the next programming screen. Press 
the enter         repeatedly until you are 
at the facility code programming entry. 
 
The display will show the users card 
facility programming screen. Clear the 

facility code by pressing         key and 
then press enter to save the changes and 
move to the next screen. 
 
The display will show the users card 
number programming screen. Clear the 

card number by pressing         key and 
then press enter to save the changes.  
 

Repeat the above steps as required for other users.  
 
 

 
 

UN00010 Name 
J Smith 

UN00010 User 
code: 1234 

UN00010 Acs Lvl

Î

 

Administration 

UN00010 Facility 
id: 0000000279 

UN00010 Card 
no: 0030497182 

Summary of Contents for LCD User Station































































































Reviews:

No comments