10
Protege™ Integrated System User Manual
Confirmation Tone
When an operation is successfully completed on the keypad the
keypad generates a series of four audible tones. The display will also
show the success or failure of the operation.
Rejection Tone
When the system times out or when an operation is incorrectly
entered on the keypad, it will generate a continuous audible tone for
three seconds.
If required the audible key press tone can be silenced
by pressing and holding the key for 3 seconds.
This option must be enabled by your security
professional or system administrator.
2.4 KEYPAD FUNCTION
The Protégé LCD keypad incorporates a backlit silicone membrane
keypad. The primary function that each key performs is shown below,
in some cases these may vary based on the function or action being
performed.
Numerical keys from 0 to 9 are used to
enter your User Code to logon to the
Protégé LCD Keypad. When in a scroll
display the key scrolls the display up
and the key scrolls down. When
controlling devices the key turns the
device on, key turns the device off
and the key will latch the device in the
on state.
The key is used to start the arming process for an Area/Partition
and the key is used to silence alarms, disarm the Area/Partition
and cancel an arming sequence.
