manualshive.com logo in svg

Protege LCD User Station, User Manual, Page: 75 / 94

Share
Download
Protege LCD User Station User Manual Download Page 75

 

 

 

73 

Protege™ Integrated System User Manual 

valid. This allows an access level to be 
assigned elevator groups based on the 
time of the day. By default this is set to 

None and is disabled if a schedule of 
None is programmed. Use the     and        
keys to scroll the records. The arrow 

Î

 

on the top line indicates it is a scroll 
selection entry screen. 

 

The display will show the option entry 
screen for the first eight elevator cars 
that belong to the elevator group. An 
option can be toggled on and off 
(including an elevator car into the group) 
by using the numerical keys      

to    . To view the options in text entry 
mode press the        key. Refer to Option 
Entry on Page 12. 

 

Depending on the number of elevator cars that are 
available in the system the number of programmable 

blocks of elevators will be restricted.  

 
 

The display will show the next block of 8 
elevator cars that belong in the group. 
Pressing        will move to the next block 

of elevator cars until you return to the 
elevator car group selection screen. 

 
 

EG010 Block 01 
   [********]   

EG010 Block XX 
   [********]   

Summary of Contents for LCD User Station































































































Reviews:

No comments