Protege LCD User Station User Manual Download Page 85 | Manualshive

Page: 85 / 94

background image

83

Protege™ Integrated System User Manual

Event View
To view events from the offline menu press [ , ] while logged
out. The screen will show the event display. Refer to Viewing Event

Information on Page 39.

Information Menu
To view system information press [ , ] while logged out. The
screen will display the first line of information with the address of the
LCD Keypad that you are logged in to.

Use the and keys to change the
display information. The first display will
show the System Controller application
version, 1.04 build 1371. This will vary
depending on the version installed.

Pressing the key will show the BIOS
Application Version Number, 1.02 Build
0375.

Pressing the key will show the BOOT
Application Version Number, 1.04 Build
0176.

Pressing the key will show the
Database Version Number, 1.09.

Pressing the key will show the serial
number of the hardware.

Pressing the key will show the
current memory capacity that is available

Info at KP039
Ver: 1.04.1371

Info at KP039
Bios: 1.04.1371

Info at KP039
Boot: 1.04.0176

Info at KP039
Database: 1.09

Info at KP039
Serial: 2AF7139B

Info at KP039
Memory: 512KB I

«
...
83
84
85
86
87
...
»

Summary of Contents for LCD User Station































































































Reviews:

No comments

Related manuals for LCD User Station

Brand: National Instruments Pages: 29

Brand: M-system Pages: 103

Brand: M-system Pages: 18

Brand: M-system Pages: 7

Brand: Measurement Computing Pages: 32

Brand: M-system Pages: 10

Brand: A.R.I. Pages: 14

Brand: Industrial Controls Pages: 17

Brand: SolarEdge Pages: 20

Brand: PS Automation Pages: 4

Brand: hotset Pages: 2

Brand: Neets Control Pages: 12

Brand: KELD Pages: 2

Brand: Viessmann Pages: 12

Brand: Dukane Pages: 30

Brand: Edimax Pages: 26

Brand: Oase Pages: 646

Brand: Sensibo Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands