68
Protege™ Integrated System User Manual
10.0 FLOOR GROUPS
Floor groups are used to define what floors a user will be able to
access and/or control when using elevators within your facility. A
floor group is assigned to an access level (Refer to the Access Levels
Section on Page 51) to restrict the ability for a user to gain entry to
certain floors. The Protégé system supports up to 250 floor groups.
10.1 ALL FLOORS GROUP
The All Floors group is a special floor group that allows access to all
floors within the system. The All Floors group is assigned to the
master access level by default.
Changing the All Floors group is not recommended as
it will restrict access to the floors used by the Master
Access Level.
10.2 PROGRAMMING FLOOR GROUPS
Floor groups should be programmed so that they are used for a group
of users, for example administration, legal department and
management where the groups can clearly be identified by the floors
that they need to have access to.
Programming Floor Groups
Enter your [USER CODE] to logon to the keypad. Refer to the Logon
Keypad Section on Page 18.
In the example floor group configuration floor group
FG010 is being edited. Modifying the All Floors group
is not recommended.
