78
Protege™ Integrated System User Manual
14.0 HOLIDAYS
Holidays are used to prevent a schedule from operating during a
predefined holiday period. A holiday can be programmed to be a
single day or a period from start until end. To make a holiday repeat
the holiday can be programmed with a blank entry for the year.
Holidays are accessed through the time menu [ , , ].
Programming Holidays
Enter your [USER CODE] to logon to the keypad. Refer to the Logon
Keypad Section on Page 18.
Select the holiday menu item located in
the main menu [ , , ]. This will
prompt you for a holiday to modify with
the first holiday that is available being
shown.
The display will show the start date
entry. Enter the date that you want the
holiday to start on. Press to clear the
entry to --:--.
The display will then move to the holiday
end date entry. Enter the date that you
want the holiday to end on. Press to
clear the entry. Program the same date
as the start date for a holiday that is
valid for one day.
To make a holiday repeat leave the year
section set to ----.
Holiday to
modify: 010
HL010 Start
Date: --/--/----
HL010 End
Date: --/--/----
