46
Protege™ Integrated System User Manual
press the key. Refer to Option Entry
on Page 12.
(1) Show User Greeting At Logon
The user will be shown a greeting message when they logon to the
LCD keypad.
(2) Go Direct To Menu Display On Logon
Normally a user will be shown the area status screen for the primary
area assigned to the keypad. Enabling this option will take the user to
the main menu. Set this option for users that have no area control
functions.
(3) User Can Acknowledge Memory
User is able to press the key to acknowledge memory.
(4) Show User Memory On Logon
The user will be shown the alarm memory when they logon. It is
recommended to also enable option three when option four is
enabled.
(5) Disarm Primary Area On Logon
When enabled the user only needs to enter their user code and press
the key. If the primary area for the keypad is armed it will be
disarmed.
(6) Disarm User Area On Logon
Operating the same as option five however the area assigned in the
users area location will be disarmed if it is armed. Use this option to
control lighting and HVAC for an office area.
(7) User Can Acknowledge Trouble Message
When enabled this option will give the user permission to
acknowledge trouble conditions in the system when the require
trouble acknowledgement is enabled.
(8) User Can Acknowledge SYSTEM Trouble Message
This option operates the same as option seven however allows a user
to acknowledge system trouble conditions.
The display will show the users special
options programming screen. An option
UN00010 Special
[********]
