19
Protege™ Integrated System User Manual
or per access level. Refer to the User Programming
Section on Page 41.
2.11 ALARM MEMORY
All zones that generate an alarm can optionally be stored in the event
log and/or the alarm memory for the area that the alarm was
activated.
If an alarm has occurred on your system
and the alarm memory display option is
enabled the display will show the alarm
memory screen.
Viewing Alarm Memory
Enter your [USER CODE] to logon to the keypad. Refer to the Logon
Keypad Section on Page 18.
Select the memory view menu item
located in the view main menu [ , ,
]. Use the up and down keys
to scroll the areas that can be viewed. If
an area has alarms in memory the
keypad will generate a rejection tone
beep and the display will show the
memory message.
To view the first item stored in the area
memory press the enter key. The
first alarm stored will be displayed and
the screen will scroll the information.
The display will then show the area that
the alarm occurred. If a tamper alarm
occurs the first line will state that it was
a 24HR alarm.
Alarms in memory
logon to view.
Warehouse
*Alarms In Mem*
Had alarm on
Roller Door
in AREA
Warehouse
