manualshive.com logo in svg

Protege LCD User Station, User Manual, Page: 24 / 94

Share
Download
Protege LCD User Station User Manual Download Page 24

 

22 

Protege™ Integrated System User Manual 

The trouble view menu can also be accessed from the 
offline menu, this option must be enabled by your 
security professional. Refer to the Offline Menu 

section on Page 82. 

 
The trouble message will scroll to show 
the full details of the trouble condition 
and action that should be taken. 
 

As shown in the example display the 
trouble message "The system or a 
component of it has a battery problem. 
Call service tech." is presented to the 
user. 
 

If troubles require acknowledgement the 
user can acknowledge the trouble by 
pressing the enter        key.  
 
To view the next trouble condition (if 
present) press the down        key.  

 
 
If viewing memory is completed the user 
can press the menu         key to exit 
view mode and return to the main menu 
were another action can be performed.  

 
Trouble Groups 
Trouble groups split the available troubles in to categories that can be 
viewed separately. When a trouble condition occurs in a trouble group 
the trouble group title will be shown in place of the trouble condition 
in the normal trouble display. Press the enter        key to view the 

troubles within the group.  

component of it 
has a battery  

Press [MENU] to 
exit view mode 

problem. Call 
service tech. 

Press [ENTER] to 
acknowledge 

Press [

Ð

] to 

show next item 

Summary of Contents for LCD User Station































































































Reviews:

No comments