manualshive.com logo in svg

Protege LCD User Station, User Manual, Page: 26 / 94

Share
Download
Protege LCD User Station User Manual Download Page 26

 

24 

Protege™ Integrated System User Manual 

company. Refer to the Configuration Section on Page 
88. 

 

System Power 
An electronic protection device used to limit current to external 
devices has tripped due to excessive loading on the circuit. 
 
Siren/Bell Output 
A siren or bell warning output is disconnected or excessive loading 

has caused the output to shutdown. 

2.14 SYSTEM TROUBLE LIST 

 

System trouble conditions monitor the system devices that are used 
to connect the system to zones, readers and other ancillary 
equipment.  
 

Module Tamper 
A module enclosure has been opened and security is potentially 
compromised. 
 
Module Communication 
Communication with a module or device is momentarily interrupted 

or the device has been removed from the system. 
 
Module Security 
A module or device has attempted to register with the system when 
the system has the network security option enabled. 
 

System Hardware 
A hardware component has failed and needs to be serviced. 
 
 

Summary of Contents for LCD User Station































































































Reviews:

No comments