manualshive.com logo in svg

Protege LCD User Station, User Manual, Page: 38 / 94

Share
Download
Protege LCD User Station User Manual Download Page 38

 

36 

Protege™ Integrated System User Manual 

access to more than one area you are 
able to scroll the areas using the         
and          keys.  

 
To search for an area by name press the 
        key to open the search screen. 
Refer to Text Searching on page 13. 
 
Once the area is shown, Press the         

key. The display will now show the status 
of the 24HR section of the area.  
 
Press the        disarm key to disable the 
24HR section or the        arm key to 
enable the 24HR section. 

  
While completing the requested 
operation on the 24HR area the display 
will briefly show the busy message to 
indicate that it is completing the required 
action. 

 

The 24HR section of an area is enabled automatically 
when the area is armed.  

3.7 BYPASSING ZONES 

 

Bypassing zones allows you to program the alarm system to ignore 
(Bypass/Deactivate) specified zones the next time the system is 

armed or until the bypass is removed (Bypass/Deactivate Latched). 
For example, you may wish to bypass certain zones when workers 
are renovating part of your establishment.  
 

A zone will automatically have the bypass settings 
removed when all areas to which the zone has been 

Office 
24HR Enabled 

Office 
24HR Disabled 

Office 
24HR Busy 

Summary of Contents for LCD User Station































































































Reviews:

No comments