35
Protege™ Integrated System User Manual
If all the zones are ready the area will
complete the arming process and briefly
display the message arm complete to
you.
After the display period for the arm
complete message the display will return
to the area status display and show the
exit delay message. You should now
leave the area.
On completion of the exit delay the
display will return to the area status
display and show the area status as
being force armed.
3.6 AREA 24HR STATUS
All available areas also contain an individual 24HR tamper section
that continuously monitors the status of connected devices in the
area. When maintenance is being performed on an area the installer
can disable the 24HR monitoring of an area without disrupting other
areas.
The 24HR section of an area can only be managed by the installer or
a user programmed with the appropriate option. By default users are
not provided access to the 24HR area.
Controlling The 24HR Area Section
Logon to the LCD Keypad by entering your [USER CODE] followed by
the enter key. Refer to the Logon Keypad Section on Page 18.
The display will show the area associated
with the LCD Keypad you have logged on
to and the current status. If you have
Office
Arm complete
Office
in EXIT delay
Office
is FORCE ARMED
Office
is DISARMED
