47
Protege™ Integrated System User Manual
can be toggled on and off by using the
numerical keys to . To view the
options in text entry mode press the
key. Refer to Option Entry on Page 12.
(1) Users Area Configured As Area Group
This option will allow a users area to be programmed as a group
providing the ability to control multiple user areas.
(2) Reserved Option
A reserved option, do not change this option.
(3) User Is A Super User
Setting the super user option gives the user a privileged status
allowing them to override anti-passback and other settings that will
prevent normal access.
(4) User Can Modify Their Own Code
Enabled this option will allow a user to modify their own code. The
user must also be given access to the user menu.
(5) Reserved Option
A reserved option, do not change this option.
(6) User Is Calculated With Loiter Area
Enabled the user is defined as being a loiter user and will be included
in the loiter area calculation. If loiter areas are used within your
application check with your Security Professional.
(7) User Enabled To Remote Logon
Enabled the user code can be used as an increased security measure
to validate a remote logon from the Protégé System Management
Suite.
(8) User Enabled As Duress Code User
Enabled the user code when entered will generate a duress code. The
duress operation on the system must be enabled by your installer.
Refer to the System Configuration Section on Page 88.
After the special option entry the display
will return to the select user screen. You
may use the up and down keys
Select user to
modify: UN00010
