manualshive.com logo in svg

Protege LCD User Station, User Manual, Page: 52 / 94

Share
Download
Protege LCD User Station User Manual Download Page 52

 

50 

Protege™ Integrated System User Manual 

Disabling User Codes 
Disabling a user code has the added benefit of monitoring the 
attempted use of any user credentials by allow access denied events 

to be processed for the user (User Code/Card Number). 
 

Select the user as explained in the 
Programming User Section on Page 41. 
Once the desired user is displayed press 
the        key. Press repeatedly until the 

access level programming screen is 
shown. 

 

Once the user name is displayed use the   
list selection keys     and     to scroll to 
the access level none. Once selected 

press the        key.  

 

When the user attempts to use the User Code at an 
LCD Keypad or presents the associated card for the 
user to a card reading device they will be denied 
access. An event will be recorded in the event log that 

can be viewed. 

 
Changing User Codes 
To change a user code follow the procedures in the Programming 
User Codes Section on Page 41. Where required modify the settings 
of the user. 

 

Select user to 
modify: UN00010 

UN00010 Access 

Î

 

None 

Summary of Contents for LCD User Station































































































Reviews:

No comments