manualshive.com logo in svg

Protege LCD User Station, User Manual, Page: 32 / 94

Share
Download
Protege LCD User Station User Manual Download Page 32

 

30 

Protege™ Integrated System User Manual 

Press the         arm key. The area will 
enable the zones in the area. The display 
will show the progress. 

 
Once the enabling of the zones has been 
completed the area will now ensure that 
the zones in the area are ready to be 
armed. 

 

If an area has zones that are not ready to be armed 
and are not secured the display will show you the first 
zone that is open in the area, refer to the following 
section explaining how to arm an area with open 
zones.  

  

If all the zones are ready the area will 
complete the arming process and briefly 
display the message "Arm Complete" to 
you. 
 
After the display period for the arm 

complete message the display will return 
to the area status display and show the 
exit delay. You should now leave the 
area. 
 

Regular Arming An Area With Open Zones 

When an area has open zones an action needs to be taken by the 
user to complete the arming process.  
 
Logon to the LCD Keypad by entering your [USER CODE] followed by 
the enter key. Refer to the Logon Keypad Section on Page 18. 
 

The display will show the area associated 
with the LCD Keypad you have logged on 

Warehouse 
Enabling zone(s) 

Warehouse 
Checking zone(s) 

Warehouse 
Arm complete 

Warehouse 
in EXIT delay 

Warehouse 
is DISARMED 

Summary of Contents for LCD User Station































































































Reviews:

No comments