Protege LCD User Station User Manual Download Page 76

Page: 76 / 94

Protege™ Integrated System User Manual

12.0 TIME SETTING

Setting the date, time and day of the week is accessed through the
time menu [ , , ].

Setting the Date and Time

Enter your [USER CODE] to logon to the keypad. Refer to the Logon
Keypad Section on Page 18.

Select the date and time menu item
located in the main menu [ , , ].
This will display the time. Use the

numerical keys to enter the time
pressing to move to the date entry
screen.

The display will show the date entry. Use
the numerical keys to enter the date

pressing to move to the day of the
week entry screen and save the date
setting.

The display will show the current day of
the week. Use the key to scroll up and

the key to scroll down. Press
to move forward to the time entry. Press
to return to the menu or to
exit.

Enter system
time: 14:29

Enter system
date: 18/10/2005

Day of Week

Monday

Summary of Contents for LCD User Station































































































Search results

Summary of Contents for LCD User Station

Reviews:

Protege LCD User Station, User Manual, Page: 76 / 94

Search results

Summary of Contents for LCD User Station

Reviews: