manualshive.com logo in svg

Protege LCD User Station, User Manual, Page: 84 / 94

Share
Download
Protege LCD User Station User Manual Download Page 84

 

82 

Protege™ Integrated System User Manual 

16.0 SPECIAL FEATURES 

 

 

The Protégé System offers many flexible features to enhance the 
management of your installation.   

16.1 OFFLINE MENU ACCESS 

 

Offline menu options are provided to allow access to certain functions 
without the need to log in to the LCD Keypad. Pressing the [      ] key 
while logged out will allow you view the offline menu. 
 

The offline menu options must be enabled by your 
security professional. Refer to the configuration 

section.  

 
Automation Menu 
To control automation points press [       ,    ] while logged out. The 
screen will display the first automation point.  
 

Use the       and       keys to change the 
displayed automation point. Press the 
      key to turn the point on for the 
timed period,      key to turn the point off 
or     key to latch the point on. 

 

Trouble View 
To view troubles from the offline menu press [       ,    ] while logged 
out. The screen will show the trouble display. Refer to Trouble View 
Section on Page 21. 
 
 

 
 

Warehouse Lights 
is OFF 

Summary of Contents for LCD User Station































































































Reviews:

No comments