TP8251
PantherPro/46 Image Recorder
7-14
PrePRESS SOLUTIONS CONFIDENTIAL
October 1995
disk based ROPM diagnostic punch test. Verify that the punch system will cycle
and punch properly.
Step 18.
If a punch system is installed, enable the media punch via the recorder control
panel. Select a resolution that the customer will most often use. Output the
PantherPro/46 copy quality test page four times and check for registration
to be in specification.
X1
X2
Lock sholder
Lock sholder set screw
The distance X1 must be equal to the distance X2
Lock Shoulder
Lock Shoulder Set Screw
The distance (X1), must be equal to the distance (X2).
X1
X2
Lock Shoulder
Lock Shoulder Set Screw
Lock Shoulder Set Screw
The distance (X1), must be equal to the distance (X2).
Lock Shoulder
Lock Shoulder Set Screw
Lock Shoulder Set Screw
Lock Shoulder Set Screw
Optical Bed
Cutter Home Switch
Cutter Motor Cable
Cutter Home Switch Cable
Base Casting
Registration Pin
Registration Pin Set Screw
Gate Registration Pin
Gate Registration Pin Set Screw
Retaining Pin
Retaining Pin Set Screw
Figure 1:
Media Out Switch
Cable Connector
Ground Wire Ring Lugs
Punch Motor/Home
Switch Cable Connector
Gate Assembly
Figure 7-4
7-18 Drag-Pinch Roller
Step 1.
Open supply cassette cover.
Step 2.
Loosen the pinch roller bracket mounting screws from one side while holding
pinch roller in place.
Step 3.
Place hand under bracket to catch the pinch roller arm, bearing and spring before
removing pinch roller.
Step 4.
Replace pinch roller in reverse order of removal.