TP8251
PantherPro/46 Image Recorder
2-12
PrePRESS SOLUTIONS CONFIDENTIAL
October 1995
Punch hole location:
Holes are punched after imaging takes place, producing a
"tail punch". A "head punch" is produced by automatically
rotating the image 180
°
before imaging.
Vertical distance,
Holes may be positioned from 1.5" inside the edge of the
hole to image:
image area up to 6.0" outside the image area. Position is
software controlled and is set by the user at the operators
panel.
Hole to following
1.75" minimum. Larger spacing is software controlled and
image distance:
is set by the user at the operators panel.
Punch timing:
2.3 second punch cycle plus media positioning time.
Media positioning:
2.8 seconds at 900 DPI, 9.0 second at 3048 DPI for holes
located at the edge of the image area. Time varies with
used definable spacing.
Horiz. position
±
0.015"
accuracy:
Horiz. position
±
0.001" (with respect to image area)
repeatability:
Vertical position accuracy:
±
0.005"
(hole to image)
Vertical position
±
0.001" (with respect to edge of image area;hole to image)
repeatability:
Certifications:
Designed for:
UL 1950, CSA C22.2 No. 950; FCC Class A, Canadian
DOC; 21 CFR 1040.10 Class I EN60950/IEC 950; EN55022
Class A; EN50082-1; IEC 825/VDE 0837 Class 1
Interface:
SCSI interface to host microcomputer
Operating Environment
Temperature:
60 to 90 degrees F (16 to 32 degrees C)
Humidity:
40% to 80% non-condensing
Heat dissipation:
Approximately 600 BTU/hr
Noise emission:
Less than 60db
Altitude:
Sea level to 7,500 ft (2,286m)