Chapter 6
6-2
V60 Ventilator Service Manual
1049766 Rev A
Reports and Software Downloads
6.1.1
Setting Up the Serial Interface Using HyperTerminal
Follow these steps to set up the HyperTerminal program, which enables the
ventilator to communicate to a service PC.
1. Launch the HyperTerminal program on the PC by clicking
Start > All
Programs > Accessories > Communications > HyperTerminal
.
2. If the
Default Telnet Program?
screen appears, click
No
(Figure 6-1).
Figure 6-1: Default Telnet Program Screen
3. Enter
V60
as the name, choose an icon, then click
OK
(Figure 6-2).
Figure 6-2: Selecting the Connection Description