WMS-308N Network Access Control Gateway
User's Manual
111
Î
Refresh :
Click this button to reload the page
Î
IP Address :
Display the IP address of the AP that the client is connected to.
Î
ESSID :
Display the ESSID of the AP that the client is connected to.
Î
AP MAC Address :
Display the MAC address of the AP that the client is connected to.
Î
Client MAC Address :
Display the MAC address of the connected client.
Î
RSSI :
Display the signal strength from the AP to the client
Î
TX/RX Rate :
Display the transmitted and received data rate by the client.
Î
TX/RX SEQ :
Display the transmitted and received sequence of package by the client.
Î
TX/RX Bytes :
Display the transmitted and received bytes of data by the client.
Î
Connect Time :
Display the total time the client has been connected for this session
Î
Actions :
Click an action button to perform the appropriate action.
9
Block :
Click this button to block a specific client from accessing the AP of the respective group. This
will add the client to the MAC Filter List of the respective group.(Please see
section 4.4.4
)
9
Disconnect :
Click this button to reconnect a specific client from accessing the AP of the respective
group.
Devices Syslog :
Display a list of recent events by the AP of the respective group.
Î
Devices :
Select a specific managed AP to get system log
Î
Refresh :
Click this button to reload the page
Î
Time :
The date and time when the event occurred.
Î
Facility :
It helps users to identify source of events such “System” or “User”
Î
Severity :
Severity level that a specific event is associated such as “info”, “error”, “warning”, etc.
Î
Message :
Description of the event.
