PheeNet WMS-308N User Manual Download Page 68

Page: 68 / 154

WMS-308N Network Access Control Gateway

User's Manual

4.3.2.3.4 Configure Thermal Printer

WMS-308N can generate ticket of on-demand users manually or automatically from Thermal Printer. Please click on

Service

Domain -> Authentication -> On-Demand -> Thermal Printer Setup

to enter the

Thermal

Printer

List

page. In the Thermal Printer List page. Administrator may configure Thermal Printer setting and generate tickets

manually and delete tickets.

If administrator wants to generate tickets from Thermal Printer, system must use

PSS-120

serial server to

control Thermal Printer.

Status :

Denote the current status of thermal printer

IP Address :

Denote the IP address of SR-120X serial server

Command Port :

Denote the command port of SR-120X serial server

COM Port :

Denote the COM port of SR-120X serial server to connect to thermal printer

Date :

Denote balance date of thermal printer

Description :

Denote the additional information of thermal printer

Actions :

Click an action button to perform the appropriate action.

Edit :

Click this option to edit the respective settings of thermal printer. There are

thermal printer can be

edited. Each thermal printer can specified billing plan

Info :

Click this option to view accounts list and information of the respective billing plan from thermal

printer created

Click

Edit

button to enter

Thermal Printer Setup

page. In the Thermal Printer Setup page, administrator may

configure related settings.

Summary of Contents for WMS-308N



























































































































































Search results

Summary of Contents for WMS-308N

Reviews:

Related manuals for WMS-308N

Brands by name

Popular brands

PheeNet WMS-308N, User Manual

Search results

Summary of Contents for WMS-308N

Reviews:

Related manuals for WMS-308N

Brands by name

Popular brands