WMS-308N Network Access Control Gateway
User's Manual
153
Appendix H. Use Auto Recovery To Setup Managed AP
WMS-308N supports centralized management of each AP. When the system has failed AP, the administrator needs
to replace the AP, and set the same as before. Using WMS-308N to quickly configure new AP, the new AP's setting
will be the same as before. Below depicts an example for “Auto Recovery” function.
Environment Description:
In this case, the WMS-308N control three managed APs and one of managed AP is failed. We replace new AP, and
use “Auto Recovery” to quickly setup.
1. Four WAP-854NP managed APs :
y
WAP-854NP-A – 00:1A:50:00:87:28
y
WAP-854NP-B – 00:1A:50:00:87:2E
y
WAP-854NP-C – 00:1A:50:00:87:2B
y
WAP-854NP-D – 00:1A:50:00:87:31
2. Replace WAP-854NP-D to WAP-854NP-C
Step 1 :
The WMS-308N can't detect WAP-854NP-C on AP Profile Management page.
Step 2 :
Replace WAP-854NP-D to WAP-854NP-C.
Step 3 :
Click “
Recovery
” button on the WAP-854NP-C (
00:1A:50:00:87:2B
)
Step 4 :
The “Scanning Available AP...” window will appear
