background image

WMS-308N Network Access Control Gateway

User's Manual 

115 

4.5      Restrain the Users and Sharing Your Internal Service 

4.5.1      Configure Time Policy 

Administrator can define time policy for 

Service

 

Domain

IP

 

Filtering

MAC

 

Filtering

 and 

Virtual

 

Server

. There 

are 

10

 policy can be defined. Please click on 

Advance

 -> 

Time

 

Policy

 to enter 

Time

 

Policy

 

Setup

 page. 

 

 

„

 

Policy :

 There are 

10

 Policy can be selected. 

„

 

Schedule Rule : 

Select desired schedule for this policy

click 

Save Action

 button to save Schedule Rule 

setting   

„

 

Time Schedule : 

Select desired day of week and time period for this policy.   

 

Below depicts an example for “On Schedule” and “Out of Schedule” 

On Schedule 

Out of Schedule 

 

 

Click “

Save

” button to add schedule to policy. There are 

10

 schedule maximum allowed in the each time policy. All 

schedule can be 

edited

 or 

removed

 in the each time policy. Click 

Reboot

 button to activate your changes.   

 

Summary of Contents for WMS-308N



























































































































































Reviews: