WMS-308N Network Access Control Gateway
User's Manual
94
Version, F/W Date, Mode and LAN Setting, or display error message “
Error:401 Unauthorized
” on
System
Message
field. Enter the correct password on the respective managed AP, and click
Get Info
button to get
information on the respective managed AP, or click
Save&Reboot AP
button to change password of the respective
managed AP.
HostName :
Denote the current hostname of the respective managed AP.
F/W Version :
Denote the current firmware version of the respective managed AP.
F/W Date :
Denote the current firmware date of the respective managed AP.
Mode :
Denote the current operating mode of the respective managed AP.
LAN Setting :
Denote the current LAN setting of the respective managed AP, the respective managed AP can
configure LAN setting and click
Save&Reboot AP
button to activated setting.
LAN Setup :
Assign IP range for specify managed APs on LAN Setup field and click
Save&Reboot AP
button
to activated.
Î
IP Address :
Specify
Start
IP address as desired to set up the managed APs. Example : If you select three
managed APs and set start IP address to 192.168.2.60, then the three managed APs' IP address range from
192.168.2.60 to 192.168.2.62.
Î
IP Netmask :
Specify IP netmask as desired to set up the managed APs.
Î
IP Gateway :
Specify default gateway as desired to set up the managed APs.
Î
DNS :
Specify primary and secondary DNS server IP as desired to set up the managed APs.
System Message :
Display system message for each managed APs after clicking
Save&Reboot AP
,
Start
, or
Import to database
button
Î
IP Address :
Denote the current IP address of the respective managed AP.
Î
MAC Address :
Denote the current MAC address of the respective managed AP.
Î
Message :
Display the current message of the respective managed AP.
9
Error: 401 Unauthorized
– System can't access managed APs after clicking
Start
or
Discover
button
to detect and access managed AP. The correct password must be entered on this field and Click
Save&Reboot AP
button to activated setting.
9
Error: Device already exist!
– The same IP address or MAC address already exist in the database.
9
Change IP: xxx:xxx:xxx:xxx
– System change IP address of the respective managed AP.
9
Import to Database
– System import configuration profile of the respective managed AP to flash.
9
Error: Profile Download ERROR
– System can't download profile of the respective managed AP, the IP
address of managed AP need the same with controller.
