PheeNet WMS-308N User Manual Download Page 67

Page: 67 / 154

WMS-308N Network Access Control Gateway

User's Manual

Open Time :

Denote the time of the first time used on this ticket

Start Time :

Denote effective starting time on this ticket

End Time :

Denote effective ending time on this ticket

Last Login :

Denote the last login time on this ticket

Price :

Denote the price of the charged on this ticket.

Currency :

Denote the currency of the charged on this ticket

Actions :

Click an action button to perform the appropriate action.

Delete :

Click this option to remove ticket from this billing plan. When administrator click this option,

the alert message will appear as below.

Click

Refresh

button to renew this page.

On this List, it only shows all of generated tickets through

External Payment Gateway

After you login system via

On-Demand

authentication, the timer page will appear. Don't close Timer

page(Because the

Logout

button on this page)

If Timer Page doesn't appear in the browser, please enter “

http(s)://domain0.login

” to open Timer

Page.(see section 4.3.1)

If administrator wants to refund transaction, please see

Appendix E. Issue Refund for PayPal

Summary of Contents for WMS-308N



























































































































































Search results

Summary of Contents for WMS-308N

Reviews:

Related manuals for WMS-308N

Brands by name

Popular brands

PheeNet WMS-308N, User Manual

Search results

Summary of Contents for WMS-308N

Reviews:

Related manuals for WMS-308N

Brands by name

Popular brands