PheeNet WMS-308N User Manual Download Page 16

Page: 16 / 154

WMS-308N Network Access Control Gateway

User's Manual

3.1.3 Hardware Installation

Please follow the steps mentioned below to install the hardware of WMS-308N

1. Place the WMS-308N at a best location.

The best location for WMS-308N is usually at the center of your wireless network.

2. Connect WMS-308N to your outbound network device.

Connect one end of the Ethernet cable to the WAN1/WAN2 port of WMS-308N on the front panel. On your

environment, connect the other end of the cable to the external Internet . The WAN1/WAN2 LED indicator should be

ON to indicate a proper connection.

3. Connect WMS-308N to your network device.

Connect one end of the Ethernet cable to LAN port of WMS-308N on the front panel. Connect the other end of

cable to a PC for configuring the system. The LAN LED indicator should be ON to indicate a proper connection.

4. Connect the DC power adapter to the WMS-308N power socket on the rear panel.

Please only use the power adapter supplied with the WMS-308N package. Using a different power

adapter may damage this system

Now, the hardware installation is completed.

To double verify the wired connection between WMS-308N and your switch/router/hub, please check the

LED status indication of these network devices.

Summary of Contents for WMS-308N



























































































































































Search results

Summary of Contents for WMS-308N

Reviews:

Related manuals for WMS-308N

Brands by name

Popular brands

PheeNet WMS-308N, User Manual

Search results

Summary of Contents for WMS-308N

Reviews:

Related manuals for WMS-308N

Brands by name

Popular brands