WMS-308N Network Access Control Gateway
User's Manual
17
3.2 Software Configuration
3.2.1 Getting Start
Step :
1. Once the hardware installation is done, set DHCP in TCP/IP of the administrator's PC to get an IP address
automatically. Connect the PC to the LAN port of WMS-308N. An IP address will be assigned to the PC
automatically via the WMS-308N.
2. Launch a web browser to access the web GUI of WMS-308N by entering “
http://192.168.2.254
” in the
address field.
3. The following Administrator Login Page will appear. Enter “
root
” in the Username field, and “
default
” in the
Password field. Click
OK
button to login.
If you can't get the login screen, you may have incorrectly set your PC to obtain an IP address
automatically from LAN port or the IP address used does not have the same subnet as the URL.
Please use default IP address such as 192.168.2.x in your network and then try it again.
