PheeNet WMS-308N User Manual Download Page 48

Page: 48 / 154

WMS-308N Network Access Control Gateway

User's Manual

4.3.1 Configure Service Domain

Administrator can configure Service Domain with different authentication service type, specified outgoing traffic, IP

PnP service, guest free service, idle time , redirect URL, scheduling authentication service and customization login

page.

Click on

Service

Domain

tools

icon

Service

Domain

Service

Domain#

to enter

Service

Domain

Setup

page.

Authentication Options :

Select authentication type for the respective Service Domain. The system supports

multiple authentication in the respective Service Domain.

Auth Type :

Select desired authentication type for this Service Domain, each Domain support multiple

authentications .

Default Auth Type :

Select default authentication type for the respective Service Domain.

Specify WAN Port :

By default, it's “

Auto

”; Select desired WAN port for the respective Service Domain, the

clients will connect to Internet via specific outgoing WAN port.

This function only activate on

Load

Balance

Mode

on WAN Traffic page.

NAT Service :

By default, it's “

Enable

” to activated NAT service. To

Disable

to unactivated NAT service.

Pregenerated Ticket :

When Pregenerated Tickets selected in Auth Type field, the Tickets DB will appear.

Select desired tickets database for Pregenerated authentication after creating the tickets database on the

Summary of Contents for WMS-308N



























































































































































Search results

Summary of Contents for WMS-308N

Reviews:

Related manuals for WMS-308N

Brands by name

Popular brands

PheeNet WMS-308N, User Manual

Search results

Summary of Contents for WMS-308N

Reviews:

Related manuals for WMS-308N

Brands by name

Popular brands