PheeNet WMS-308N User Manual Download Page 47

Page: 47 / 154

WMS-308N Network Access Control Gateway

User's Manual

4.3 Access To External Network With Service Domain

WMS-308N supports

Service Domain, administrator can quickly setup via this page.

LAN Port :

The bonding interface for the respective Service Domain

Auth Type :

The authentication type for the respective Service Domain. There are

Six

types : Pregenereated

Ticket. On-demand, Local Users, Remote Radius Server, LDAP and POP3.

WAN Port :

Denote the outgoing traffic for the respective Service Domain.

IPPnP Service :

Denote status of IP PnP service for the respective Service Domain.

Guest Service :

Denote status of Guest service for the respective Service Domain.

Schedule :

Denote the schedule of authentication service on the respective Service Domain.

Redirect URL :

The redirect URL for this Login page of Service Domain.

Login Page :

Denote the custom page for this Service Domain. There are two types :

Template

page or Upload

page

Click tools icon on the top-right corner of each Domain settings window, the Service Domain page will

pop-up.

Summary of Contents for WMS-308N



























































































































































Search results

Summary of Contents for WMS-308N

Reviews:

Related manuals for WMS-308N

Brands by name

Popular brands

PheeNet WMS-308N, User Manual

Search results

Summary of Contents for WMS-308N

Reviews:

Related manuals for WMS-308N

Brands by name

Popular brands