WMS-308N Network Access Control Gateway
User's Manual
104
9
Rx Threshold :
Rx Threshold is in the range of
0~120400
and set in unit of
KBps
. The default value
is
10240
KBps. Specify desired receive bandwidth for wireless clients limitation in the same group of
each managed AP. The wireless clients unable connect to managed AP, when bandwidth of receive
achieve limitation.
9
Tx Threshold :
Tx Threshold is in the range of
0~120400
and set in unit of
KBps
. The default value
is
10240
KBps. Specify desired transmit bandwidth for wireless clients limitation in the same group of
each managed AP. The wireless clients unable connect to managed AP, when bandwidth of transmit
achieve limitation.
9
Group MAX Service Clients :
Enter maximum number of clients to a desired number in the range of
0~256
. The default value is
32
. For example, while the number of client is set to 32, only 32 clients are
allowed to connect with all managed AP in the this group
Î
MAC Filter Control :
By default, it's “
Disable
”. To
Enable
to activate MAC filter control in the same group
APs, the system will automatically assign block MAC address of the wireless clients for group managed APs
after the
Sync Interval
(Please see
section 4.4.2
)
9
MAC Address :
Enter MAC address in this field. There are maximum
20
clients allowed in this MAC
Filter List.
The MAC Address of the wireless clients can be added and removed to the MAC Filter List using the
Add
and
Delete
button.
