PheeNet WMS-308N User Manual Download Page 117

Page: 117 / 154

WMS-308N Network Access Control Gateway

User's Manual

117

4.5.3 MAC Filter

The administrator can setting MAC Filter via this page, Please click on

Advance -> MAC Filter

and follow the below

setting.

Action :

Select the desired access control rule; the options are “Only

Deny

List MAC

”, or “

Disable

”.

define certain clients in the list which will have denied access to the Access Point while the access will be granted for

all the remaining clients –

Access Control Type

is set to

Reject

MAC Address :

Enter MAC address in this field. There are maximum

clients users allowed in this MAC

address list.

Schedule :

Select specified time period for this rule.

Click “

Save

” button to add MAC filter rule to List. There are maximum

rules allowed in this MAC Filter List. All

rules can

removed

on the List. Click

Reboot

button to activate your changes.

Summary of Contents for WMS-308N



























































































































































Search results

Summary of Contents for WMS-308N

Reviews:

Related manuals for WMS-308N

Brands by name

Popular brands

PheeNet WMS-308N, User Manual

Search results

Summary of Contents for WMS-308N

Reviews:

Related manuals for WMS-308N

Brands by name

Popular brands