WMS-308N Network Access Control Gateway
User's Manual
99
4.4.3 Managed AP Batch Setup
WMS-308N supports batch configuration of the managed APs, for automatically assigning IP addresses from a
range of IP addresses to the selected managed APs; for configuring wireless general and security settings to the
selected managed APs; for upgrading firmware to the selected managed APs.
Available AP Profile List :
All managed AP's profiles will be displayed on the list.
Î
Group :
Select a specific group of managed APs for batch configuration.
Î
Select :
Select desired managed AP for batch configuration.
Î
Host Name :
Denote the current system name of the respective managed AP.
Î
AP MAC Address :
Denote the current MAC address of the respective managed AP.
Î
IP Address :
Denote the current IP address of the respective managed AP.
Î
Status :
Denote the current status of the respective managed AP after click “
Apply AP
” or “
Reboot
AP
”
button for batching configuration. The following status : Save LAN/Wireless/VAP Error[Connect Fail(1)],
Upgrade Firmware Error[Connect Fail(1)], Upgrade Firmware Error[Firmware Upload ERROR], Save
LAN/Wireless/VAP Success, Check Free Memery, Upgrade Firmware Now, Rebooting .
1. To prevent data loss during firmware upgrade, please backup current settings before proceeding.
2. Do not interrupt during firmware upgrade including switch power on/off or unplug RJ-45 cable from
PoE port as this may damage managed APs.
Batch Setup :
Select desired for batch configuration, the related setting field will appear.
Î
LAN Setup :
Specify IP address, Netmask, Gateway and DNS for selected managed APs.
Î
Management Setup :
Specify desired system information, administrator's password, HTTP's port and Telnet
's port.
