PheeNet WMS-308N User Manual Download Page 41

Page: 41 / 154

WMS-308N Network Access Control Gateway

User's Manual

4.2.4 Backup / Restore and Reset to Factory

Current settings on the system can be backed up, or previous backed up settings can be restored as well as

resetting the system back to factory default can be performed via this page. Please click on

Utilities -> Profile

Setting

and follow the below setting.

Save Settings To PC :

Click

Save

button to save the current configuration and

database

to a local disk.

Load Settings from PC :

Click

Browse

button to locate a configuration file and database to restore, and then

click

Upload

button to upload. The system will

restart

after uploading configuration and database.

Reset To Factory Default :

Click

Default

button to reset back to the factory default settings. The system will

restart

after uploading configuration and database.

1. Do not interrupt during Profile upload or Reset to Default including power on/off as this may damage

system.

2. While Profile upload or Reset to Default, the Power/Status Green LED will change to Amber LED.

Summary of Contents for WMS-308N



























































































































































Search results

Summary of Contents for WMS-308N

Reviews:

Related manuals for WMS-308N

Brands by name

Popular brands

PheeNet WMS-308N, User Manual

Search results

Summary of Contents for WMS-308N

Reviews:

Related manuals for WMS-308N

Brands by name

Popular brands