manualshive.com logo in svg

PheeNet WMS-308N, User Manual, Page: 43 / 154

Share
Download
PheeNet WMS-308N User Manual Download Page 43

WMS-308N Network Access Control Gateway

User's Manual 

43 

4.2.6      Network Utility 

The administrator can diagnose network connectivity via the PING utility.

   

Please click on 

Utilities -> Network Utility

 and follow the below setting. 

 

 

„

 

Ping :

 This utility will help ping other devices on the network to verify connectivity. Ping utility, using ICMP 

packets, detects connectivity and latency between two network nodes. As result of that, packet loss and latency 

time are available in the 

Result

 field while running the PING test. 

Î

 

Destination IP/Domain : 

Enter desired domain name, i.e. 

www.google.com

, or IP address of the 

destination, and click 

ping

 button to proceed. The ping result will be shown in the 

Result

 field. 

Î

 

Times :

 By default, it’s 5 and the range is from 1 to 60. It indicates number of connectivity test. 

„

 

Traceroute :

 Allows tracing the hops from the WMS-308N device to a selected outgoing IP address. It should 

be used for the finding the route taken by ICMP packets across the network to the destination host. The test is 

started using the 

Start

 button, click 

Stop

 button to stopped test 

Î

 

Destination Host :

 Specifies the Destination Host for the finding the route taken by ICMP packets across 

the network. 

Î

 

MAX Hop :

 Specifies the maximum number of hops( max time-to-live value) traceroute will probe. 

„

 

Lookup IP :

 This utility will covert a host or domain name into IP address. The test is started using the 

Start

 

button, click 

Stop

 button to stopped test 

Î

 

Domain :

 Specifies the host or domain for converting 

Î

 

Count :

 By default, it’s 10 and the range is from 1 to 99. It indicates number of converting test. 

 

Summary of Contents for WMS-308N



























































































































































Reviews:

No comments