PheeNet WMS-308N User Manual Download Page 26

Page: 26 / 154

WMS-308N Network Access Control Gateway

User's Manual

based dial-up connections or Point-to-Point Tunneling Protocol (PPTP) virtual private network (VPN) connections.

128

bit

key (strong) and

bit

key (standard) MPPE encryption schemes are supported. MPPE provides data

security for the PPTP connection that is between the VPN client and the VPN server.

DNS :

Select “No Default DNS Server” or “Specify DNS Server IP” option as desired to set up system DNS.

Primary :

The IP address of the primary DNS server.

Secondary :

The IP address of the secondary DNS server.

MAC Clone :

The MAC address is a 12-digit HEX code uniquely assigned to hardware as identification. Some

ISPs require you to register a MAC address in order to access to Internet. If not, you could use default MAC or

clone MAC from a PC.

Keep Default MAC Address :

Keep the default MAC address of WAN port on the system.

Clone MAC Address :

If you want to clone the MAC address of the PC, then click the

Clone MAC Address

button. The system will automatically detect your PC's MAC address.

The Clone MAC Address field will display MAC address of the PC connected to system. Click

Save

button

can make clone MAC effective.

Manual MAC Address :

Enter the MAC address registered with your ISP.

Change these settings as described here and click

Save

button to save your changes. Click

Reboot

button to

activate your changes

Summary of Contents for WMS-308N



























































































































































Search results

Summary of Contents for WMS-308N

Reviews:

Related manuals for WMS-308N

Brands by name

Popular brands

PheeNet WMS-308N, User Manual

Search results

Summary of Contents for WMS-308N

Reviews:

Related manuals for WMS-308N

Brands by name

Popular brands