PheeNet WMS-308N User Manual Download Page 53

Page: 53 / 154

WMS-308N Network Access Control Gateway

User's Manual

4.3.2 Configure Authentication

WMS-308N support

types of authentication :

Pregenerated

Tickets

Demand

Users

Local

RADIUS

Accounts

Remote

RADIUS

Server

and

Remote

LDAP

Server

and

POP3

. This section depicts to configure the

settings for pregenerated tickets, on-demand users and authentication server. If authentication does not selected,

the clients can access Internet without authentication.

4.3.2.1 Authentication Management

The WMS-308N supports multiple login for one accounts and administrator can configure alias name of the

respective authentication type on login page. Please click on

Service Domain -> Authentication ->

Authentication Management

, and follow the below setting.

Multiple Login :

Click

Enable

button to activate multiple login service, and Disable to inactivate multiple login

service.

Auth Type :

Denote authentication type of the system.

Service Name :

Enter desired alias name of the respective authentication type on login page.

Description :

Enter desired description name of the respective authentication type.

Change these settings as described here and click

Save

button to save your changes. Click

Reboot

button to

activate your changes

Summary of Contents for WMS-308N



























































































































































Search results

Summary of Contents for WMS-308N

Reviews:

Related manuals for WMS-308N

Brands by name

Popular brands

PheeNet WMS-308N, User Manual

Search results

Summary of Contents for WMS-308N

Reviews:

Related manuals for WMS-308N

Brands by name

Popular brands