WMS-308N Network Access Control Gateway
User's Manual
109
IP Address :
Denote the IP address of the AP.
MAC Address :
Denote the MAC address of the AP.
F/W Version :
Denote the firmware version of the AP.
System Up Time :
Denote the system up time of the AP.
Status :
Denote the currently connected status of the AP.
Clients :
Denote the number of clients connected to the AP.
Packet(RX/TX) :
Denote the transmitted and received packet of data by the AP.
Bytes(RX/TX) :
Denote the transmitted and received bytes of data by the AP.
Actions :
Click an action button to perform the appropriate action.
Î
Locate :
Click this button to locate the AP, the LED on the AP will flash so that you can place it in the
correct location on the map. The LED will flash around
10
seconds
Î
Reboot :
Click this button to restart the selected AP
