Perma Distributor PRO MP-6, Operating Instructions Manual

Page: 70 / 80

perma PRO / PRO C MP-2 - 1 -
Determine Discharge Period
Delivery / Content
Check the lubrication specifications of your application for the correct discharge amount and times per
lubrication point that the PRO / PRO C MP-2 distributor outlet should discharge. If necessary, calculate this
amount in
cm
3
per 100 operating hours.
Double this figure to get the total lubricant amount in cm
3
for 100 operating hours (two lubrication points receive
the same amount of lubricant).
Go to the chart in the PRO / PRO C operating manual (chapter 6.7). Find your previously determined total
lubricant amount in the chart. The chart will tell you the correct lubricator setting depending on the size of the
PRO LC unit.
Calculation example:
Lubrication data listed on the specification plate of an electric motor:
150 cm
3
/ 4000 h lubricant per bearing (2 bearings!)
This amounts to 3.75 cm
3
per 100 operating hours .
Each outlet of the distributor PRO / PRO C MP-2 must discharge 3.75 cm
3
per 100 hours.
Total discharge amount that the lubrication system must discharge:
7.5 cm
3
per 100 operating hours (3.75 cm
3
times 2 outlets / 100 h)
The chart on chapter 6.7 of the PRO / PRO C operating manual shows the following setting:
20 weeks discharge with lubricant cartridge PRO LC 250 or
9 months discharge with cartridge PRO LC 500
1
2
3
1
2
3
Amount Part name Part no. Part
1
2
2
1
1
PRO MP-2 Basic system
- PRO Drive with PRO MP-2 Distributor.............................................
- PRO MP-2 Accessory Box:
Tube connector G1/8o for tube oØ 8 mm 90° - rotary type..............
Tube Connector G1/8a for tube aØ 8 mm straight...........................
- PRO Mounting Device......................................................................
- PRO Battery B.................................................................................
106908
.......................................................
.......................................................
.......................................................
.......................................................
............Not shown in picture..........
1
2
2
1
1
PRO C MP-2 Basic system
- PRO C Drive with PRO C MP-2 Distributor.....................................
- PRO MP-2 Accessory Box:
Tube connector G1/8o for tube oØ 8 mm 90° - rotary type..............
Tube Connector G1/8a for tube aØ 8 mm straight...........................
- PRO Mounting Device......................................................................
- PRO C M12 Cable 5 m....................................................................
106910
............Not shown in picture..........
.......................................................
.......................................................
.......................................................
............Not shown in picture..........
Following parts must also be ordered for a complete system:
1
1 PRO LC 250
PRO Cover for LC 250
PRO LC 500
PRO Cover for LC 500
on request
106959
on request
106960
Tube black up to +80 °C oØ 8 mm x iØ 5 mm - for PRO per meter
(please state desired length on your order)
101569
....
....
....
....
....
....
....
3
4
5
3
5
1
2
4
6