perma PRO
- 5 -
2.
Safety Instructions
2.1
Persons Responsible for Safety
♦ The operator or his safety officer must warrant,
that all the relevant regulations, instructions and laws are adhered to;
that only qualified personnel will work with and on the lubricator;
that unauthorized personnel are not allowed to work with and on the lubricator;
that the safety regulations are adhered to when mounting the lubricator or during maintenance.
2.2
General Safety Instructions
♦ We are not laying claim to completeness in regards to these safety instructions. Please contact perma-tec
Customer Service if you have any questions or problems.
♦ At the time of delivery the lubricator is in line with state-of-the-art technology and in principle is considered to
be safe to operate.
♦ Dangers emanate from the lubricator for persons, the lubricator itself and for other material assets of the
operator if:
unqualified personnel operates the lubricator;
the lubricator is used inappropriately and for operations that it was not intended to be used for;
the lubricator setting / variation is incorrect;
the lubricator is opened by force while in operation;
the lubricator is not mounted with the perma mounting device;
the tube connection to the lubrication point was not carried out and attached correctly;
♦ Operate the lubricator only when it is in perfect condition.
♦ Retrofitting, changing, or reconstructing the lubricator is prohibited. perma-tec must be consulted first.
♦ Only original tube connections and connectors from perma-tec can be used on or with the lubrication system
since these will withhold high pressures of up to 25 bar (360psi).
♦ Ambient media, especially chemically aggressive substances, can attack seals and plastic.
2.3
Safety Information for perma PRO
Safety during Installation and Maintenance
♦ Ensure that all workstations and traffic routes are clean and safe!
♦ Ensure that the relevant regulations and guidelines are adhered to when the installation or maintenance work
is carried out in places where danger of falling exists.
♦ Ensure that the relevant safety and operating instructions are observed when the lubricators are installed or
serviced on machines or in factories (i.e. to stop the machine).
Safety when Handling the PRO LC unit
♦ Avoid contact of lubricant with eyes, skin, and clothing!
♦ Avoid swallowing of lubricant!
♦ Prevent lubricant from getting into soil or sewer system!
♦ Observe safety data sheets of lubricants!
You may also download data sheets of lubricants supplied by perma-tec from perma-tec´s web page
(www.perma-tec.com) or ask your local supplier.
♦ Lubricant on traffic ways will increase the danger of slipping! Therefore, immediately clean lubricant from
floors with special cleaner.
♦ Only use original PRO LC units from perma-tec!
Safety when Handling Batteries!
♦ Avoid contact of battery substances with eyes, skin and clothing!
♦ Avoid swallowing any leaking battery substances!
♦ Do not expose batteries to extreme heat and do not throw into open fire!
♦ Do not recharge batteries!
♦ Ensure that regulations for waste disposal of batteries are observed!
♦ Only use original battery sets from perma-tec!
Summary of Contents for Distributor PRO MP-6
Page 3: ...Chap 4 3 perma PRO MP 6 Distributor Drilling template...
Page 4: ...45 75 66 5 6 5 Drilling template Screws M6 2x Fasting points 3x Fasting points...
Page 77: ...Chap 4 3 perma PRO MP 6 Distributor Drilling template...
Page 78: ...45 75 66 5 6 5 Drilling template Screws M6 2x Fasting points 3x Fasting points...
