Perma Distributor PRO MP-6, Operating Instructions Manual

Page: 66 / 80

perma PRO MP-6 Distributor - 15 -
PRO
ON/OFF
SELECT
MODE
SAVE
PRO C
SELECT
MODE
SAVE
88
Outlets
1
3
2
4
5
6
Days
Weeks
Months
%Vol.
LC250 0 LC 2 500
Confi g.
Time Time PIN
Outlets
1
3
2
4
5
6
88
Outlets
1
3
2
4
5
6
Days
Weeks
Months
%Vol.
LC250 0 LC 2 500
Confi g.
Time Time PIN
Outlets
1
3
2
4
5
6
88
Outlets
1
3
2
4
5
6
Days
Weeks
Months
%Vol.
LC250 0 LC 2 500
Confi g.
Time Time PIN
Outlets
1
3
2
4
5
6
88
Outlets
1
3
2
4
5
6
Days
Weeks
Months
%Vol.
LC250 0 LC 2 500
Confi g.
Time Time PIN
Outlets
1
3
2
4
5
6
88
Outlets
1
3
2
4
5
6
Days
Weeks
Months
%Vol.
LC250 0 LC 2 500
Confi g.
Time Time PIN
Outlets
1
3
2
4
5
6
88
Outlets
1
3
2
4
5
6
Days
Weeks
Months
%Vol.
LC250 0 LC 2 500
Confi g.
Time Time PIN
Outlets
1
3
2
4
5
6
88
Outlets
1
3
2
4
5
6
Days
Weeks
Months
%Vol.
LC250 0 LC 2 500
Confi g.
Time Time PIN
Outlets
1
3
2
4
5
6
Initialization finished
5.10 Initialization of Distributor
Automatic Initialization of the Distributor
In order to supply lubricant to all open outlets and to ensure a correct operation of the perma MP-6, an
automatic initialization of the lubrication system is carried out when the system is switched on for the first time.
During initialization the system recognizes the activated outlets. Outlets (represented by squares) in the display
are blinking. Activated outlets (squares) will be blackened, inactive outlets (squares) are blank.
When initialization is finished, the display shows the remaining volume and activated outlets. The green
LED starts to blink and the lubrication system operates.
Manual Initialization of the Distributor
If you connect a new distributor to the lubricator (exchange old distributor with new one), you must do a manual
initialization of the perma MP-6. The system recognizes the activated outlets. Outlets (represented by squares) in
the display are blinking. Activated outlets (squares) will be blackened, inactive outlets (squares) are blank.
A manual initialization (long push of both buttons on the lubricator – refer to figure 11) can only be done when the
lubrication system is turned OFF (display of lubricator shows “ ” for OFF)
PRO will immediately start initialization (refer to figure 12).
PRO C will show a blinking “ ” in the display for the triggered initialization – the actual initialization will be carried
out as soon as the system is turned ON (refer to figure 12).
Lubricator PRO
When the manual initialization is completed, the display of the lubricator PRO shows “ ” for OFF and
the lubrication system is switched off.
Lubricator PRO C
When the manual initialization is completed, the display of the lubricator PRO C shows the remaining
volume of the PRO LC unit and the lubrication system is switched on.
Initialization Sequence
figure 11 For a manual initialization, press and hold down both buttons of the lubricator simultaneously.
figure 12