Perma Distributor PRO MP-6, Operating Instructions Manual

Page: 52 / 80

perma PRO MP-6 Distributor - 1 -
Accessories
Activation of Outlets on Lubrication System PRO / PRO C
The Distributor perma MP-6
MODE
SAVE
Config.
Outlets
1
3
2
4
5
6
On/Off Outlet 1
PRO C PRO
or
SELECT
ON/OFF
SELECT
Confi guration of outlets:
Activation of outlet 1
Config.
Outlets
1
3
2
4
5
6
Outlet 1 active
MODE
SAVE
Config.
Outlets
1
3
2
4
5
6
On/Off Outlet 2
PRO C PRO
or
SELECT
ON/OFF
SELECT
Config.
Outlets
1
3
2
4
5
6
Outlet 2 active
(if desired, remaining outlets
can be turned On/Off the
same way)
max. 6 mm
max. 6 mm
max. 6 mm
Outlets 1 to 3 with
connections
for
grease lines
Housing
contains drive
unit and
distribution system
Connection thread
for attaching a lubricator of the
perma PRO range.
Outlets 4 to 6 with
connections for
grease lines
Connector
used for plugging in the
connecting cable.
Plug (4 pcs.)
for sealing the outlets that are
not used.
Connecting cable (1 pc.)
used for power supply and for
communication.
6 connections
(straight or angle)
for grease lines.
Activation/selection of outlets is done on the connected lubrication system PRO/PRO C. Please observe
operating instructions (refer to chapter 6.8) of the attached lubrication system since the following chart does
not go into detail. Outlets must be activated by the user before operation (factory setting = all outlets inactive).