perma PRO MP-6 Distributor
- 5 -
2.
Safety Instructions
2.1
Persons Responsible for Safety
♦ The operator or his safety officer must warrant,
that all the relevant regulations, instructions and laws are adhered to;
that only qualified personnel will work with and on the distributor;
that unauthorized personnel are not allowed to work with and on the distributor;
that the safety regulations are adhered to when mounting the distributor or during maintenance.
2.2
General Safety Instructions
♦ We are not laying claim to completeness as regards these safety instructions. Please contact perma-tec
Customer Service if you have any queries or problems.
♦ At the time of delivery the lubricator is in line with state-of-the-art technology and in principle is considered to
be safe to operate.
♦ The distributor may only be used with a lubricator of the perma PRO range.
♦ Dangers emanate from the distributor perma MP-6 for persons, the distributor itself, the lubricator and for
other material assets of the operator if:
unqualified personnel operates the distributor;
the distributor is used inappropriately and for operations that it was not intended to be used for;
the distributor setting/variation is incorrect;
the distributor is opened by force while in operation;
the distributor is not mounted with the perma mounting device and the lubricator;
the tube connection to the lubrication point was not carried out and attached correctly.
♦ Operate the distributor only when it is in perfect condition.
♦ Retrofitting, changing, or reconstructing the distributor is not allowed. perma-tec must be consulted first.
♦ Only original tube connections and connectors from perma-tec can be used on or with the distributor since
these will withhold high pressures of up to 25 bar (360psi).
♦ Ambient media, especially chemically aggressive substances, can attack seals and plastic.
2.3
Safety Information for perma MP-6
Safety during Installation and Maintenance
♦ Ensure that all workstations and traffic routes are clean and safe!
♦ Ensure that the relevant regulations and guidelines are adhered to when the installation or maintenance work
is carried out in places where danger of falling exists.
♦ Ensure that the relevant safety and operating instructions are observed when the lubricators and distributors
are installed or serviced on machines or in factories (i.e. to stop the machine).
Safety When Handling Lubricants
♦ Avoid contact of lubricant with eyes, skin, and clothing!
♦ Avoid swallowing of lubricant!
♦ Prevent lubricant from getting into soil or sewer system!
♦ Observe safety data sheets of lubricants!
You may also download data sheets of lubricants supplied by perma-tec from perma-tec´s web page
(www.perma-tec.com) or ask your local supplier.
♦ Lubricant on traffic ways will increase the danger of slipping! Therefore, immediately clean lubricant from
floors with special cleaner!
Summary of Contents for Distributor PRO MP-6
Page 3: ...Chap 4 3 perma PRO MP 6 Distributor Drilling template...
Page 4: ...45 75 66 5 6 5 Drilling template Screws M6 2x Fasting points 3x Fasting points...
Page 77: ...Chap 4 3 perma PRO MP 6 Distributor Drilling template...
Page 78: ...45 75 66 5 6 5 Drilling template Screws M6 2x Fasting points 3x Fasting points...
