perma PRO MP-6 Distributor
- 4 -
1.2 Markings
♦ The perma MP-6 distributor is clearly marked with a serial number and a label on the drive unit.
♦
CE mark
on the drive unit.
♦
UL mark
on the drive unit:
“This equipment is suitable for use in Class I, Div. 2, Groups A, B, C and D; or Non-Hazardous Locations
only. Warning - Explosions Hazard - Substitution of components may impair suitability for Class I, Division 2.”
The lubricants dispensed by this equipment are to have flash points greater than 200 °F.“
♦ Manufacturer:
perma-tec GmbH & Co. KG
Hammelburger Straße 21
97717 Euerdorf
Germany
Tel: +49 (0) 9704 609-0
E-mail:
Fax: +49 (0) 9704 609-50
Homepage: www.perma-tec.com
1.3
Intended Usage
The distributor perma MP-6
♦ may only be used together with a lubricator of the perma PRO range;
♦ must be connected to the lubricator using the connecting cable;
♦ immediately supplies up to
six
lubrication points with lubricant, at a
pressure build-up of max. 25 bar
(360 psi)
, constantly, precisely and independent of temperature;
♦ has passed the environmental audit according to standard EN 60068-2-6 (vibration test) without any
component damage or malfunctions. In test: PRO drive unit with MP-6, PRO LC unit 500 cm
3
, and mounting
device in various mounting positions;
♦ can be used for all lubrication points of sliding- and roller bearings, drive- and transport chains, sliding guide
ways, open gears and seals;
♦
must
be used with a suitable protection box (refer to ”Accessories and Spare Parts”) if operated outside or
around splashing water;
♦ may only be used at lubrication points of the same type, which require identical discharge volumes;
♦ may only be fitted with original connections and plugs from perma-tec;
♦ may only be used with original grease lines from perma-tec;
♦ is intended for use on machinery and equipment;
♦ is only to be used for the intended purpose and purposes confirmed by perma-tec;
♦ is only to be used for operating conditions recommended in this operating manual;
♦ is only to be used with settings and variations recommended in this operating manual.
Any other usage, setting, addition, and variation is considered to be inappropriate!
1.4
Legal Requirements
Liability
♦ The information, data and tips stated in this operating manual were up-to-date as of the printing date. No
claims for already delivered distributors perma MP-6 can be made based on the information, pictures and
descriptions.
♦ perma-tec GmbH & Co. KG can not be held liable for damages and malfunctions caused by:
inappropriate usage
unauthorized alterations to the distributor
inappropriate operations on or with the distributor
incorrect operation and settings of the distributor
incorrect settings of time and size of the complete lubrication system
ignoring the operating manual of the distributor or the lubricator
Warranty
♦ Warranty terms and conditions: see terms and conditions of sale and delivery appertaining to perma-tec
GmbH & Co. KG.
♦ Lodge any warranty claims with your local supplier immediately after the defect or error has been identified.
♦ The warranty expires in all instances where no liability claims can be enforced.
Summary of Contents for Distributor PRO MP-6
Page 3: ...Chap 4 3 perma PRO MP 6 Distributor Drilling template...
Page 4: ...45 75 66 5 6 5 Drilling template Screws M6 2x Fasting points 3x Fasting points...
Page 77: ...Chap 4 3 perma PRO MP 6 Distributor Drilling template...
Page 78: ...45 75 66 5 6 5 Drilling template Screws M6 2x Fasting points 3x Fasting points...
