perma PRO C
- 4 -
1.3 Markings
♦ The lubricator perma PRO C is clearly marked with a label on the drive system (serial number) and a label
on the PRO LC unit.
♦
CE mark
on the drive unit
♦ Manufacturer:
perma-tec GmbH & Co. KG
Hammelburger Straße 21
97717 Euerdorf
Germany
Tel: +49 (0) 9704 609-0
E-mail:
Fax: +49 (0) 9704 609-50
Homepage: www.perma-tec.com
1.4
Intended Usage
The lubricator perma PRO C
♦ immediately supplies all lubrication points with lubricant, at a
pressure build-up of max. 25 bar
(360 psi),
consistantly, precisely and independent of temperature;
♦ can be used for all lubrication points of sliding- and roller bearings, drive- and transport chains, sliding
guideways, open gears and seals;
♦
must
be used with a suitable protection box (refer to ”Accessories and Spare Parts”) if operated outside or
around splashing water;
♦ can be connected to the control system (e.g. PLC) of your machine;
♦ must be provided with the supply voltage from your equipment;
♦ should only be connected to/used with original lubrication tubes from perma-tec GmbH & Co. KG;
♦ is intended for use on machinery and equipment;
♦ is only to be used for the ordered purpose and purposes confirmed by perma-tec GmbH & Co. KG;
♦ is only to be used for operating conditions recommended in this operating manual;
♦ is only to be used with settings and variations recommended in this operating manual.
DO NOT USE in explosive areas!
Any other usage, setting, addition, and variation is considered to be inappropriate!
1.5
Legal Requirements
Liability
♦ The information, data and tips stated in this operating manual were up-to-date as of the printing date.
No claims for already delivered lubricators perma PRO C can be made based on the information, pictures
and descriptions.
♦ perma-tec GmbH & Co. KG can not be held liable for damages and malfunctions caused by:
inappropriate usage;
unauthorized alterations to the drive system or the PRO LC unit;
inappropriate operations on or with the lubricator;
incorrect operation and settings of the lubricator;
incorrect settings of time and size of the lubricator;
ignoring the operating manual.
Warranty
♦ Warranty terms and conditions: see terms and conditions of sale and delivery appertaining to perma-tec
GmbH & Co. KG.
♦ Lodge any warranty claims with your local supplier immediately after the defect or error has been identified.
♦ The warranty expires in all instances where no liability claims can be enforced.
Summary of Contents for Distributor PRO MP-6
Page 3: ...Chap 4 3 perma PRO MP 6 Distributor Drilling template...
Page 4: ...45 75 66 5 6 5 Drilling template Screws M6 2x Fasting points 3x Fasting points...
Page 77: ...Chap 4 3 perma PRO MP 6 Distributor Drilling template...
Page 78: ...45 75 66 5 6 5 Drilling template Screws M6 2x Fasting points 3x Fasting points...
