perma PRO
- 4 -
1.3 Markings
♦ The lubricator perma PRO is clearly marked with a label (serial number) on the drive system and a label on
the PRO LC unit.
♦
CE mark
on the drive unit.
♦
UL mark
on the drive unit:
“This equipment is suitable for use in Class I, Div. 2, Groups A, B, C and D; or Non-Hazardous Locations only.
Warning - Explosions Hazard - Substitution of components may impair suitability for Class I, Division 2.
The lubricants dispensed by this equipment are to have flash points greater than 200 °F.“
♦ Manufacturer:
perma-tec GmbH & Co. KG
Hammelburger Straße 21
97717 Euerdorf
Germany
Tel: +49 (0) 9704 609-0
E-mail:
Fax: +49 (0) 9704 609-50
Homepage: www.perma-tec.com
1.4
Intended Usage
The lubricator perma PRO
♦ immediately supplies all lubrication points with lubricant, at a
pressure build-up of max. 25 bar
(360 psi.),
permanently, precisely and independent of temperature;
♦ has passed the environmental audit according to standard EN 60068-2-6 (vibration test) without any
component damage or malfunctions. In test: PRO drive unit with MP-6, PRO LC unit 500 cm
3
, and mounting
device in various mounting positions;
♦ can be used for all lubrication points of sliding- and roller bearings, drive- and transport chains, sliding
guideways, open gears and seals;
♦
must
be used with a suitable protection box (refer to ”Accessories and Spare Parts”) if operated outside or
around splashing water;
♦ should only be connected to/used with original lubrication tubes from perma-tec GmbH & Co. KG;
♦ is intended for use on machinery and equipment;
♦ is only to be used for the ordered purpose and purposes confirmed by perma-tec;
♦ is only to be used for operating conditions recommended in this operating manual;
♦ is only to be used with settings and variations recommended in this operating manual.
Any other usage, setting, addition, and variation is considered to be inappropriate!
1.5
Legal Requirements
Liability
♦ The information, data and tips stated in this operating manual were up-to-data as of the printing date.
No claims for already delivered lubricators perma PRO can be made based on the information, pictures and
descriptions.
♦ perma-tec GmbH & Co. KG can not be held liable for damages and malfunctions caused by:
inappropriate usage;
unauthorized alterations to the drive system or the PRO LC unit;
inappropriate operations on or with the lubricator;
incorrect operation and settings of the lubricator;
incorrect settings of time and size of the lubricator;
ignoring the operating manual.
Warranty
♦ Warranty terms and conditions: see terms and conditions of sale and delivery appertaining to perma-tec
GmbH & Co. KG.
♦ Lodge any warranty claims with your local supplier immediately after the defect or error has been identified.
♦ The warranty expires in all instances where no liability claims can be enforced.
Summary of Contents for Distributor PRO MP-6
Page 3: ...Chap 4 3 perma PRO MP 6 Distributor Drilling template...
Page 4: ...45 75 66 5 6 5 Drilling template Screws M6 2x Fasting points 3x Fasting points...
Page 77: ...Chap 4 3 perma PRO MP 6 Distributor Drilling template...
Page 78: ...45 75 66 5 6 5 Drilling template Screws M6 2x Fasting points 3x Fasting points...
