Perkins 1300 EDi Series, Workshop Manual, Page: 44 / 264

3
32 Workshop Manual, TPD 1353E, Issue 3
Peregrine EDi and 1300 Series EDi
13 Remove both of the feeler gauges from the rocker shaft, see Operation 3-5.
14 Check the rocker levers for free movement.
15 Set the valve tip clearance, see Operation 3-21.
16 Fit the high-pressure oil pipe at the supply manifold.
17 Fit the fuel pipe at the supply manifold.
18 Fit the rocker cover, see Operation 3-2.
19 Fit the gasket for the exhaust manifold. Fit the exhaust manifold and turbocharger assembly. Fit and tighten
the setscrews for the exhaust manifold to 81 Nm (60 lbf ft) 8,3 kgf m.
20 Fit all of the pipes and hoses removed earlier from the turbocharger.
21 Fill the cooling system.
22 Eliminate air from the fuel system, see Operation 11-9.
This document has been printed from SPI². Not for Resale