Perkins 1300 EDi Series, Workshop Manual, Page: 94 / 264

5
82 Workshop Manual, TPD 1353E, Issue 3
Peregrine EDi and 1300 Series EDi
To remove Operation 5-12
1 Drain the lubricating oil and the coolant.
2 Remove the lubricating oil sump, see Operation 10-9.
3 Release the setscrews of the rear main bearing and remove the main bearing cap (A) complete with the
lower half of the thrust bearing (A1).
4 Push one end of the upper half of the thrust bearing with a suitable tool made of a soft material to slide the
bearing out. Where necessary, move the crankshaft to the front or to the rear to loosen a tight bearing.
W052/2
A
1
This document has been printed from SPI². Not for Resale